Seat belt pre-tensioners
Seat belt pre-tensioners
As above can they be reset as I have an height adjustable seat frame & the pre-tensioner has fire while in storage after the little red tag fell out ?
Re: Seat belt pre-tensioners
Nope, once they have fired, they are bin fodder.
The cartridges are easily replaced.
Just riveted to the seat rail.
The buckle receiver is bolted to the seat rail.
And a zip-tie under the seat section to secure the actuation cable in place.
So the whole tensioner assembly can be swapped between seats if necessary.
I did this when replacing my LS seats with SRi units.
The cartridges are easily replaced.
Just riveted to the seat rail.
The buckle receiver is bolted to the seat rail.
And a zip-tie under the seat section to secure the actuation cable in place.
So the whole tensioner assembly can be swapped between seats if necessary.
I did this when replacing my LS seats with SRi units.