Is there a trick or procedure for the removal of the rear brake flexible hoses?
I have removed the lower clip how would I proceed from there?
Rear brake hose removal and replacement on V6
-
- Posts: 18
- Joined: Thu Jul 18, 2019 8:45 am
Re: Rear brake hose removal and replacement on V6
The two rear brake hoses connect between the metal brake pipes on the car body and the metal brake pipes that run along the rear axle beam to the brake calipers on each side. I think they can be removed by undoing the unions at each end of them. I'm not clear what the lower clip is that you have removed. There are clips that hold the metal brake pipes to the body and to the rear axle beam but you don't need to remove these to release the hoses.
1993 Cavalier V6 Auto in Smoke Grey Metallic
Re: Rear brake hose removal and replacement on V6
Isn't there like a large flat square circlip, pull that off then the pipe should pull out the bracket??
Good chance it's all rusted into one big blob.
Good chance it's all rusted into one big blob.
David