cylinderhead torque settings

Post queries regarding your Mk3 Cavalier's mechanical components (engine, transmission, turbochargers etc.) here
Post Reply
User avatar
cavaliersri
Registered user
Posts: 87
Joined: Thu Feb 24, 2011 10:16 pm
Location: dundee

cylinderhead torque settings

Post by cavaliersri »

does anyone know what the tourque settings and degrees are for a 1.6 8v astra.53 plate

thanks
if the bumpers dont scuff then it aint low enuf.
Top
User avatar
planetc
Registered user
Posts: 6258
Joined: Wed Oct 20, 2010 9:59 pm
Location: Eating cake in Bexhill On Sea
Contact:
Contact planetc

Re: cylinderhead torque settings

Post by planetc »

18 pound feet or 25nm then 60 degrees three times, ie 60/60/60
"No the temperature gauge doesn't work........
we've driven 150 miles today........
the heater went cold last Thursday........
they check the level when it's serviced don't they?"
Top
User avatar
planetc
Registered user
Posts: 6258
Joined: Wed Oct 20, 2010 9:59 pm
Location: Eating cake in Bexhill On Sea
Contact:
Contact planetc

Re: cylinderhead torque settings

Post by planetc »

..... and spiral from the middle out, in case you didn't know
"No the temperature gauge doesn't work........
we've driven 150 miles today........
the heater went cold last Thursday........
they check the level when it's serviced don't they?"
Top
User avatar
cavaliersri
Registered user
Posts: 87
Joined: Thu Feb 24, 2011 10:16 pm
Location: dundee

Re: cylinderhead torque settings

Post by cavaliersri »

thanks very much
if the bumpers dont scuff then it aint low enuf.
Top
Post Reply

Return to “Faults and Fixes: Mechanical”