Vauxhall Cavalier Mk3 Owners Club - cavmk3oc

Hey guys , i'm new in here , greetings about the forum it's very helpful! i'm looking for some information about online site where to buy a genuine vauxhall parts , becouse in Bulgaria they are very expensive for our standart of lifestyle .

Thanks

(edited slightly (gays to guys )

I'm affraid gays, is a different forum!

But there are plenty of places like e-bay from other countries...but not the Netherlands as they are very expensive.

Many spares are sold from independent vauxhall specialists like LMF Vauxhall, Vauxhall Green Spares and Vauxhallworldparts...all are on the internet.
I am sure there will be your equivalent in Bulgaria or surrounding countries / states.

I'm very sorry for my English, i don't use it often . thanks for information , and sorry again

wouldn't worry too much, we've been called worse Hope you find the bits you need .

thanks again , i'm looking at e-bay. and read the topics they are great but , can't find something about tuning c20ne

No worries, it will be a lot better than my Bulgarian

What parts are you looking for?

I find ebay.de to have the most spares available for Cavaliers.
As an example, I found about 10 (TEN) C18NZ engines with less than 100Km on them.
There is usually only one on ebay.co.uk.

manifold, cams, vernier pulleys afm conversions.

Okay, had a look round, and found this on another forum..

http://www.migweb.co.uk/forums/engines- ... nable.html

There is a lot of chat involved, but there is some useful information here and there...

It mentions fitting an older 1.8 cylinder head,
carlton 3.0 throttle body
2.0 SEH pistons and cam shaft
Vernier Pulleys and (in excess of 285 degrees)
Air flow meter
and so on.

Hope it helps.

thanks again , i just hear about the 3.0 throttle body i'm gonna check it , but they are rare
great info

I have one more question , i found a gUy ( ) who make the ceramics plate with graphite on it becouse of that we have to buy brand new air flow meter , the man says if the number on it, ends with figures 502.503.504 its compatible ,becouse they are only for Audi's ABK motor.. if someone know's the figures to se if this can make?

I don't know about this one, sorry

i found it , thanks anyway

Sorry we didn't give much help.

However, have you made any further progress with your tuning of the C20NE?

for my regret , they are more important thinks to do now , but i'm not quet , justo delayed for next year, now i'm doing something else , want to modified from normal air condition to automatic climate control , just looking around for it . the parts for the tuning i have the most of them just 3-4 parts need to gather.

it's a good idea... bringing an older car to modern standards.

Anymore information on this?
Thanks, or a link to the information?

I don't know about this one, sorry [/quote]


i found it , thanks anyway [/quote]

Anymore information on this?
Thanks, or a link to the information?[/quote]

Number of the plate ? what information?

i found it , thanks anyway [/quote]

Anymore information on this?
Thanks, or a link to the information?[/quote]

Number of the plate ? what information?[/quote]

The MAF and airflow bits and peices.

Anymore information on this?
Thanks, or a link to the information?[/quote]

Number of the plate ? what information?[/quote]

The MAF and airflow bits and peices.[/quote]


the c20ne is with air flow meter (motronik 1.5 ) but now i'm thinking to go with the new generation air flow meter's from astra mk3 ( motronik 1.5.2) just waiting to arrives