ICE

Post queries regarding your Mk3 Cavalier's ICE and electrical components (head units, wiring, retro-fit toys, upgrades etc.) here

Moderator: Robsey

Post Reply
jacksy
Posts: 16
Joined: Fri Jul 30, 2010 9:12 am

ICE

Post by jacksy »

how do I enter code for radio in mk3 cavalier
User avatar
Robsey
Club Admin
Posts: 10654
Joined: Fri Dec 12, 2008 1:42 pm
Location: East Manchester

Re: ICE

Post by Robsey »

Thats quite an easy one

Turn on ignition
Turn off the radio
Then
hold the AS button pressed whilst you turn the radio back on
you should then get code and four lines, or just four lines.
Press button 1 repeatedly until the first digit is reached,
Then press 2 repeatedly until the second digit is reached
then 3 for the third digit and 4 for the fourth.

When all four digits match the code on your audio pass, you can then hold down the AS button until the radio suddenly bursts into life, (just a couple of seconds).

You do not need to do this again until you blow the fuse or disconnect the battery.
Post Reply