Hi,
Can anyone confirm the wiring for the alternator on my C18NZ? I disconnected the old one some time ago and did take a photo (See link) so I know where the big red cable goes, but does the blue and white one connect to the other terminal on the alternator in the photo below?
(Confusingly there is a second blue and white wire coming from the same loom, but I labelled it going to a connector on the oil filter mounting. Wish I'd done the same with the other one...doh!)
https://drive.google.com/file/d/1HWCiwD ... sp=sharing
Cheers
John
C18NZ - Alternator wiring
Moderator: Robsey
-
- Registered user
- Posts: 69
- Joined: Tue Mar 04, 2014 8:40 pm
- Location: Aberdeenshire
Re: C18NZ - Alternator wiring
The blue / white goes to the alternator.
It controls the charge warning light on the dash.
The other blue wire should have a green stripe on it.
That is for the oil pressure warning light.
If it is a plain blue wire, then the sensor nearest to match would be the coolant temperature sensor on the front of the thermostat housing.
It controls the charge warning light on the dash.
The other blue wire should have a green stripe on it.
That is for the oil pressure warning light.
If it is a plain blue wire, then the sensor nearest to match would be the coolant temperature sensor on the front of the thermostat housing.
-
- Registered user
- Posts: 69
- Joined: Tue Mar 04, 2014 8:40 pm
- Location: Aberdeenshire
Re: C18NZ - Alternator wiring
Cheers Robsey