Page 1 of 1
Need to pick your brains
Posted: Sat Feb 21, 2015 11:09 pm
by joe cavalier sri
Hi im due to put some boddies on my xe which was off troys cav xe now troy said if I modifiy the xe loom to work with the injector wires coming off the boddies the mototronic ecu I have would learn to run the injectors the injectors and boddies are off a Honda cbr 900 motorbike just wondering what u guys know and if the mototronic ecu would learn the ecu is off a 1990 cav gsi 4x4 running a xe.
Re: Need to pick your brains
Posted: Tue Feb 24, 2015 8:15 pm
by planetc
Motronic will learn fuelling and adjust within reason. Troy will have done his homework and if he is of the opinion that it will be usable in this form then I would imagine he's right.
Re: Need to pick your brains
Posted: Fri Feb 27, 2015 2:32 am
by joe cavalier sri
Just need the wireing diagrams for a Honda cbr 900 motorbike cant find a good one on net ?
Re: Need to pick your brains
Posted: Fri Feb 27, 2015 12:05 pm
by btcctroy
What do you need a diagram for the injectors, change plugs to suit the blackbirds injectors. Pretty sure the injectors arnt polarity dependant. Modify the bracket and arm to fit the tps.
The idle control can be manually adjusted. Motronic probably won't like this so 4 outlet from the aluminium manifold will need nipples fed to a manifold where the icv feeds.
All pipes and need to be exactly the same length the nipples need to be exactly the same distance from the intake work it to work correct
