Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

I have a stainless exhaust for sale, 3inch downpipe , 2.5 inch back to back box, back box has 4inch round inward rolled back pipe, no centre boxes just straight through to back box, this cost me 600pounds to get fabricated, don't know iif it will fit your cav Joe, but I'm looking for 150 pounds if y...

finished cleaning and painting my new petrol tank, the other one leaks when it get about 3/4 full http://i288.photobucket.com/albums/ll184/andysri/PICT0063%201_zpsv6qfde1z.jpg the cav is going into the body shop next week, to get both sides of the bonnet done,, both front wings, below headlights and...

welcome to cavmk3 Berwyn, I also have a cavalier turbo, but I'm only a novice compared to you, I have only had mine 9 years, but as Dan said get some pics up of your cavalier, there not many of these classic cars left now, I know quite a few of these cavs, as I'm admin on the cavalier turbo forum, s...

I would be interested in this meet, depending on date etc, always willing to bring the cav and get it out the garage and have a excuse to drive it, Ads

actually Dan they should be some in there as I fitted them not long back, proberbly become dislodged and fell under the headlights, ill have a look when I next have time, as I have another front grill to fit with the original badge on. Ads

well I fitted the 11.6 psi spring into the actuator, and put some pre load on the actuator arm, and t00k it out for a test drive, it seemed to be the fastest its been for a long time, holding about 12psi and over boosting to about 15 - 16 psi, and the fuelling was ok on my wide band,, I'm over the m...

acquired a uprated actuator for my newly installed gt28 turbo as a xmas present http://i288.photobucket.com/albums/ll184/andysri/WP_20151230_001_zpsellwhgox.jpg fitted the actuator tioday, http://i288.photobucket.com/albums/ll184/andysri/PICT0050_zpsby52axij.jpg http://i288.photobucket.com/albums/ll...

welcome back mate how ya doing, see you still have the colarado, I'm still plodding along with the cav turbo, good to see you posting back on the forums mate, Ads

welcome Hugh, I'm from the north east, born and bred in Sunderland, moved to Peterlee when I met my partner, ive had all sorts of cavs over the years but my present cav turbo 4x4 is definetly the best, awesome performance and handling even in standard guise, I know they are now expensive to buy . bu...

as it was Saturday had a little cav time today, fitted a TX autosport chrome induction pipe http://i288.photobucket.com/albums/ll184/andysri/WP_20151114_002_zps6xiamkye.jpg http://i288.photobucket.com/albums/ll184/andysri/WP_20151114_003_zpsyg8xa8z8.jpg plumbed in my turbo smart dual boost controlle...

they are just some cheapo ones off ebay,, ive used them to cover my Vauxhall mats to keep them clean, but they doo look ok , Ads

I acquired a Vectra GSI steering wheel for a very reasonable price, I know I had one on the cav before and took it off and sold it, but I have always like them and regretted getting rid of the other one, anyway fitted the steering wheel today, and I think it looks well, some pics http://i288.photobu...

Thanks Dan its a tx autosport intercooler mate. ITS actually decent quality for the price.

got the exhaust down pipe all welded up and fitted http://i288.photobucket.com/albums/ll184/andysri/WP_20151024_002_zps9ku9ff02.jpg bought 5ltrs of oil, new filter, and magnetic sump plug, fitted new filter and plug and changed the oil http://i288.photobucket.com/albums/ll184/andysri/WP_20151024_001...

got the exhaust side of the turbo couple through to the centre pipe, its just placed together for the time being and wants welding up properly later, got the rest of the ancillaries back together that I had to take off, primed the turbo and started the car, made sure oil was flowing through the turb...

this was without doubt the best cavalier turbo I have seen, and before anyone gets upset, its only my opinion, lol, Ads

id be very careful with parts coming of the water pump, the outer ring came off one of my water pumps and fell down into the crankshaft sprocket, jamming the timing belt, resulting in 8 bent exhaust valves, ouch, Ads

Hi Dan sorry to see turbo 1 go but by the sound of it , its gone to a good home, do we know who the new owner is, is he a member on here or on CTOC,, I am not prying into your business, but I like to keep track if possible where these iconic car are going, Ads

I have a let in my cav turbo, it has standard internals, (piston , rods etc), but I have larger intercooler, adjustable FPR, uprated fuel pump, vxr injectors, larger oil cooler, evo 5 chips in the ecu, a wideband gauge, and I'm in the process of fitting a scroll manifold and a g28 turbo, so as you s...

probably take it up tp around 300bhp and 350 lbs of torque, with about 12psi of boost, plus you would need uprated plugs , possibly adjustable FPR, and maybe a wideband to make sure its all running ok,, a standard let in decent condition should take 300 bhp ok

had a little cav time today, fitted a new oil feed line for the new turbo using braided hose and AN fittings, I took pics of this but they are crap so will not upload them, then fitted exhaust flange and pipe I made up to the exhaust side of the new turbo http://i288.photobucket.com/albums/ll184/and...

sorry I didn't mean it that way, lol, just the way it came out, but I still stand by what I said, lol, Ads

In my opinion you were robbed Dan, worth 6k all day, proberbly more with it being the only one with the more up to date zlet, Ads

that was a really nice cav Dan, and the only one I know of with the zlet fitted, do you ever regret selling it, ? Ads