Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

I wish to change the filter for the AisinAF20 auto box in my 1993 2.0i cav. Does anyone know where I can buy one, have seen one once but cant find it now!

can someone kindly advise where I can take a feed for 6 watt led lights to front of car. It will need to be ignition fed.
Thank you

cav 342 thank you very much for the info

sorry , the car is an auto. surely the oil cooler is attached in some way so might be possible to disconnect?

want to fit new rad which I have but old one has gearbox oil cooler fitted. Can I be advised how to take the cooler off the old rad please? and reconnect to new rad

can anyone advise if the auto box filter should be serviced or renewed. I cant find any info on this. If renewal where could I get one as I have not been able to find one anywhere, thanks.car is 1993 2.0i gls

tried 2 bulbs, 1 new. no elec. I will try and find a fuse

tested cable and no supply.

main is working, side was but flickering so I think I caused short.cant make out the fuse box labels , don't seem clear to me. Is there a location I can check. bulbholder is ok
thanks for the reply

I have managed to lose the elec feed to the ns sidelight. Is there an inline fuse for this or how do I trace the supply. Os is ok
car is 1993 mk3 2,0i gls

I have upgraded the brakes on my 1993 mk3 GLS 2.0 auto as follows: new master cylinder new drilled and slotted discs new pads bled system new ss flexible pipes despite all this the brakes have no bite. The pedal is not solid-has approx. 1 inch free travel. Stopping is ok and smooth but I was hoping ...

I am trying to find new bleed valves for the rear calipers. Would prefer stainless steel but cant find a supplier. Can anyone help me with size, and a supplier please

Cavalier mk3 2ltr GSL auto 1993
I wish to rebuild my rear brakes complete back to a new master cylinder. Advice would be appreciated as to where to go to source the materials for this job ie brake pipes fittings hoses.
Any helpful comments about this job would be appreciated
jacksy

I want to replace my original radio with an ALPINE unit. Problem is connector for alpine is outside the radio and so unit will not fully house in the recess. I understand I need to disconnect the socket from rear of radio housing and make the connection outside at the rear of the box. This means rem...

how do I enter code for radio in mk3 cavalier